Sanctuary
Sanctuary displays a creamy beige background and incorporates delicate flecks of brown and white. It creates a subtle yet very attractive countertop.
Sample: $ 8.50
- Solid Surface Collection
- Sinks
- Features + Benefits
- Edges
- FAQs
- Care + Cleaning
- Warranty
- Warranty Transfer
- Test Data
- Non-porous so bacteria and stains can’t penetrate
- Easy to clean / low maintenance
- Stain resistant
- Creates a seamless appearance
- Repairable and renewable
- Warm-to-the-touch, smooth surface
- 30 Year Transferable Warranty
-
Eased -
Bullnose -
Bevel -
Top and Bottom Bevel -
3/4 Roundover -
3/8 Roundover -
1/4 Top and Bottom Roundover -
Small Ogee -
Large Ogee -
Large Roman Ogee
Edge images should be used for reference only as actual shape and availability may vary by market. Please see your Lowe's kitchen specialist for more information.
How hygienic is allen + roth™ solid surface?
allen + roth™ solid surface is nonporous, so germs can't penetrate. Also, if you choose an allen + roth™ integrated sink, there are no sink lips where germs can hide.
Is there any special cleaning or care needed for my allen + roth™ solid surface countertop?
No. Due to its non-porous attribute, there is no wax or sealant required. Solid surface can be cleaned with soapy water or an ammonia-based cleanser. Rinse and wipe dry. Avoid using strong acidic cleansers (like those designed for drains, toilets or ovens). Some of them can cause whitening, which can be difficult to remove.
Do allen + roth™ solid surface countertops stain?
allen + roth™ solid surface is nonporous, so it's naturally stain-resistant. Stains just can't penetrate the acrylic solid surface. And unlike granite solid surface never needs to be periodically sealed to resist stains.
What if I scratch my allen + roth™ solid surface countertop?
Don't panic. Your allen + roth™ solid surface countertop is completely renewable. Usually, just buffing with a Scotch-Brite™ pad will remove all but the deepest scratches. For deep scratches (cuts), gouges, and chips, please contact your allen + roth™ solid surface certified fabricator installer. In most instances, your countertop can be restored to its original state.
Can I use my allen + roth™ solid surface countertop as a cutting board?
No, the use of a separate cutting board is recommended.
How can I prevent heat damage to my allen + roth™ solid surface countertop?
By not placing hot pans or pots directly on your allen + roth™ solid surface countertop. The use of hot pads and/or trivets is recommended. Prolonged or extreme heat can cause discoloring.
Do solid surface countertops have seams?
If seams are necessary, placement will be at the fabricator’s discretion. allen + roth™ solid surface seams will be inconspicuous (not invisible).
Do dark colors show wear and tear?
Dark colors of any solid surface require more maintenance and cleaning. Under everyday use darker colors will show dust, rubs, fingerprints, scratches and watermarks easier than lighter color patterns.
How do I clean my allen + roth™ solid surface sink?
The same way you clean your countertop. Or use Soft Scrub liquid cleanser and a gray Scotch-Brite™ pad. Rub over the entire sink to blend in the finish.
How do I clean my allen + roth™ stainless steel sink?
After each use, rinse thoroughly. To minimize mineral deposits or water spotting, wipe the sink dry with a clean, soft cloth. Avoid any abrasive cleaners such as steel wool or scrub pads, as this will dull the finish. Avoid having household cleaning agents such as bleach sit in the sink as this may damage the finish. Stainless steel doesn’t rust; however, use of appropriate stainless steel sink cleaning agents is recommended for removing various surface residues.
What does my allen + roth™ Lifetime Limited Warranty cover?
Sage Surfaces warrants to the original end user – purchaser/owner in the U.S. and Canada that its product of allen + roth™ countertop and sink products shall be free from manufacturing defects under normal use and service. This warranty applies to the repair or replacement of failed product that has been permanently installed in original owner(s) residence when installed by a Sage authorized fabricator/installer. This includes reasonable labor charges needed to repair or replace the product.
The allen + roth™ warranty does not cover damage resulting from improper transportation, fabrication, installation, care and maintenance, storage or handling of the product purchased. The warranty also doesn’t cover damage caused by improper use or abuse including, but not limited to, accidents, abuse of impact, chemical damage, corrosion damage, acts of nature, job-site conditions, or structural movement. Other exclusions may apply, please review the allen + roth™ warranty for more information.- Remove dirt and residue with soapy water or an ammonia-based cleaner. Rinse and wipe dry.
- Prevent hard water marks by wiping surfaces dry after spills or cleaning. Ordinary vinegar removes most dried water spots.
- Remove stubborn stains with a diluted mixture of water and bleach or denatured alcohol on a cotton cloth. Rinse with water and wipe dry. Avoid strong acidic products such as toilet or oven cleaners.
- Disinfect by wiping surfaces with mixture of one part water / one part household bleach. Rinse with clear water and wipe dry.
- Clean Integrated sinks the same way you clean your countertop. Or use Soft Scrub liquid cleanser and a gray Scotch-Brite™ pad. Rub over the entire sink to blend in the finish.
- Prevent heat damage by using trivets or hot pads under hot objects and electronic cookware. Prolonged or extreme heat can cause discoloring.
- Prevent other damage by not exposing your countertop to strong chemicals, such as paint removers, oven cleaners, etc. If contact does occur, rinse immediately and thoroughly with clear water. If you spill nail polish remove it with a non-acetone polish remover. Don’t cut directly on your solid surface countertop, rather use a cutting board. Always run your faucet while pouring boiling water down solid surface sinks.
- Remove minor cuts and scratches yourself with abrasive Scotch-Brite™ pads. Roughest to finest are green, peach, lilac, blue and gray. Start with a green pad. Wet the surface and rub in a small circular motion over the scratch or cut. Rinse pad periodically. When the scratch or cut is removed, wet the surface again and rub with progressively finer pads in larger and larger circles until the renewed area blends in with the surrounding surface. Rinse with clear water and wipe dry. Rinse pads and air dry before storing. For deep cuts/gouges, please contact your Lowe’s certified fabricator installer. In most instances solid surface is repairable, but will require the expertise of a Lowe’s fabricator.
Disinfecting
The following disinfectants are approved to use on allen + roth solid surface and are available at Lowe’s®.
- MonoFoil D Multi-Surface Disinfectant which reports to kill 99.9% of bacteria when used as directed.
- Weiman Granite & Stone Daily Cleaner & Shine which reports to kill 99.9% of germs and bacteria when used as directed.
Download Solid Surface Care and Maintenance Information (PDF)
Download Keeping Your Countertop Clean and Safe Information (PDF)
Residential allen + roth Solid Surface 30 Year Transferable Warranty
Sage Surfaces, LLC (hereunder “Sage”) warrants to the original end user – purchaser/owner in the U.S. and Canada that its product of allen + roth countertop products shall be free from manufacturing defects under normal use and service. This warranty applies to the repair or replacement of failed product that has been permanently installed in original owner(s) residence when installed by a Sage authorized fabricator/installer. This includes reasonable labor charges needed to repair or replace the product. Sage’s obligation as to repair or replacement shall further be limited to repair or replacement with colors, styles and finishes of products that are available at the time of repair or replacement. The option to repair or replace product failures due to manufacturing defects is at the sole discretion of Sage.
The 30 Year Transferable Warranty applies to allen + roth countertop and sink products only for interior, residential application(s) in North America. The warranty covers seam performance but not appearance. Silicone seams do not constitute part of the allen + roth installation and accordingly are not covered by this warranty. This warranty is void unless the product has been paid for in full.
Under this 30 Year Transferable Warranty, Sage authorized agents must be permitted sufficient time and opportunity to inspect the product(s), evaluate and respond to any claim(s). All decisions regarding the existence of manufacturing defects or affecting this warranty shall be made by Sage and shall be final and binding upon all parties.
Exclusions for Residential allen + roth Solid Surface 30 Year Transferable Warranty:
- Damage resulting from improper transportation, fabrication, installation, care and maintenance, storage, or handling of the product purchased.
- Use for any exterior application or for any flooring application.
- Damage caused by improper use or abuse includes, but not limited to, damage from accidents, abuse of impact causing chips, cracks and fractures, chemical damage, corrosion damage, acts of nature, job-site conditions or structural movement.
- Exposure to excessive heat that creates white marks, white rings or cracks appear on the product. (Cracking can result around a cooktop when the product is exposed to cookware that is on or partially on a heating element and overhangs the countertop causing excessive heat on the product or from using high temperatures for excessively
- lengthy periods of time).
- Installed allen + roth countertop products that are removed from the original place of installation.
- Seam appearance, adhesives, caulk and/or other accessory items.
- Damage caused by improperly installed, used or maintained appliances, including garbage disposals over ¾ H.P., or any disposal so installed as to create excessive vibration, or installation of an instant hot water producing/dispensing appliance in allen + roth sinks.
- Thermoforming: Product failure due to bending or curving is not covered under warranty.
- Conditions caused by normal wear and tear such as stains, scratches, water spots and burns. Products are not scratch, heat or stain proof. Cutting boards should be used for cutting, rubber footed trivets used when moving a hot object directly from a heat source onto the product, and compliance with the allen + roth care and maintenance are highly recommended.
- Supplemental repair including, but not limited to, electrical, tile or wall surfaces, backsplashes, cabinetry, freight, and plumbing modifications necessary to repair allen + roth products.
- Product usage for commercial application(s) including, but not limited to, installation in store, office or other places of business.
- Interior applications beyond countertops, vertical applications and backsplash such as, but not limited to, saunas, shower pans, steam rooms.
- Defects that were visible at the time of fabrication/installation and were not avoided during fabrication/installation.
The professional fabricator/installer is responsible to inspect the allen + roth products before fabricating and/or installing the products. All parties must agree to comply with the terms and conditions outlined in this 30 Year Transferable Warranty. When choosing a color or finish, please refer to samples only as a general indication of a particular color’s design pattern, aesthetics, hue and finish. Samples are not guaranteed to be an exact replica of allen + roth solid surface and may vary slightly from the actual, installed allen + roth product. If after, or during installation, you decide that you do not like the color you selected, replacement is not covered by this warranty.
No other warranties express or implied, are made, including merchantability or fitness for a particular purpose. Except as provided herein, Sage is not liable in tort or contract for any loss or direct, incidental, or consequential damages as a result of the use or the inability to use allen + roth products. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state, or in Canada, from province to province. Some states/provinces do not allow the exclusion or limitation of implied warranties or of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Sage makes no other guarantee, representation, or warranty (express or implied) with respect to its products, except as expressly stated herein. No one other than Sage is authorized or permitted to make or provide any promise, representation or warranty with respect to allen + roth products. To qualify for service under this warranty please contact the retail location from which you purchased your allen + roth product.
If you are the original purchaser of the product and are filing a warranty claim, a purchase receipt or other acceptable proof of purchase clearly showing both the date of purchase and that the installation was performed by a Sage authorized fabricator/ installer will be required before warranty service is rendered.
If you are the current owner of the house in which the original end user had the countertop installed, the warranty will have had to be transferred to you by the original end user, (or previous warranty holder to which the warranty was appropriately transferred) according to the Warranty Transfer Procedure outlined below prior to your countertop experiencing the event prompting the claim. A purchase receipt or other acceptable proof of purchase clearly showing both the date of purchase and that the installation was performed by a Sage authorized fabricator/installer will be required before warranty service is rendered.
Warranty Transfer Procedure
The warranty can easily be transferred in a few minutes by following the process below:
- Go to www.sagesurfaces.com
- Select the ‘Surfaces’ menu item
- Select the ‘Warranty Transfer’ item from the drop down menu.
-
Fill out the form with the requested information:
* Original Owner’s Name or Previous Owner’s Name to whom the warranty was appropriately transferred
* Address where the countertop was installed
* Name of Retailer from whom the Countertop was Purchase
* Address of the Retailer’s Store Location where the Original Purchase was made
* Original Date of Purchase
* Countertop Material
* Countertop Color
* Name of the Person to Whom the Warranty is being Transferred - Click ‘Submit’
If the warranty resolution is not handled to your satisfaction, please go to our website at www.sagesurfaces.com under the warranty section and provide us with the details so we may better serve you.
Commercial Warranty
Commercial allen + roth™ Solid Surface - 15-Limited Year Warranty (Product Only)
Sage Surfaces, LLC (hereunder "Sage") warrants to the original end user - purchaser/owner in the U.S. and Canada that its product of allen + roth™ countertop and sink products shall be free from manufacturing defects under normal use and service for fifteen (15) years from date of installation to the original purchaser. This is a product only warranty, not a fabrication and/or installation warranty. This warranty applies to the repair or replacement of failed product that has been permanently installed in original owner(s) residence when installed by a Sage authorized fabricator/installer. Sage obligation as to repair or replacement shall further be limited to repair or replacement with colors, styles and finishes of products that are available at the time of repair or replacement. The option to repair or replace product failures due to manufacturing defects is at the sole discretion of Sage.
The 15-Year Limited Warranty is non-transferrable and applies to allen + roth™ solid surface countertop and sink products only for interior application(s) in North America. The warranty does not cover seam performance or appearance. Silicone seams do not constitute part of the allen + roth™ solid surface installation and accordingly are not covered by this warranty. This warranty is void unless the product has been paid for in full.
Under this 15-Year Limited Warranty, Sage authorized agents must be permitted sufficient time and opportunity to inspect the product(s), evaluate and respond to any claim(s). All decisions regarding the existence of manufacturing defects or affecting this warranty shall be made by Sage and shall be final and binding upon all parties.
Exclusions for Commercial allen + roth™ solid surface 15-Year Limited Warranty:
- Damage resulting from improper transportation, fabrication, installation, care and maintenance, storage or handling of the product purchased.
- Use for any exterior application or for any flooring application.
- Damage caused by improper use or abuse includes, but not limited to, damage from accidents, abuse of impact, chemical damage, bleach damage, corrosion damage, Acts of God, job-site conditions, or structural movement.
- Exposure to excessive heat that creates white marks, white rings or cracks appear on the product. (Cracking can result around a cooktop when the product is exposed to cookware that is on or partially on a heating element and overhangs the countertop causing excessive heat on the product or from using high temperatures for excessively lengthy periods of time).
- Installed allen + roth™ solid surface countertop products that are removed from the original place of installation
- Seam appearance, adhesives, caulk and/or other accessory items
- Damage caused by improperly installed, used or maintained appliances, including garbage disposals over 3/4 H.P., or any disposal so installed as the create excessive vibration, or installation of an instant hot water producing/dispensing appliance in allen + roth™ solid surface sinks.
- Thermoforming: Product failure due to bending or curving is not covered under warranty
- Conditions caused by normal wear and tear such as stains, scratches, water spots and burns. Products are not scratch, heat or stain proof. Cutting boards should be used for cutting, rubber footed trivets used when moving a hot object directly from a heat source onto the product, and compliance with the allen + roth™ solid surface care and maintenance are highly recommended.
- Supplemental repair including, but not limited to, electrical, tile or wall surfaces, backsplashes, cabinetry, freight, and plumbing modifications necessary to repair allen + roth™ solid surface products.
- Interior applications beyond countertops, vertical applications and backsplash such as, but not limited to, saunas, shower pans, steam rooms.
- Defects that were visible at the time of fabrication/installation and were not avoided during fabrication/installation.
The professional fabricator/installer is responsible to inspect the allen + roth™ solid surface products before fabricating and/or installing the products. All parties must agree to comply with the terms and conditions outlined in this 15-Year Limited Warranty.
When choosing a color or finish, please refer to samples only as a general indication of a particular color's design patter, aesthetics, hue and finish. Samples are not guaranteed to be an exact replica of allen + roth™ solid surface product. If after, or during installation, you decide that you do not like the color you selected, replacement is not covered by this warranty.
No other warranties express or implied, are made, including merchantability or fitness for a particular purpose. Except as provided herein, Sage is not liable in tort or contract for any loss or direct, incidental, or consequential damages as a result of the use or the inability to allen + roth™ solid surface products. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state, or in Canada, from province to province. Some states/provinces do not allow the exclusion or limitation of implied warranties or of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Sage makes no other guarantee, representation, or warranty (express or implied) with respect to its products, except as expressly stated herein. No one other than Sage is authorized or permitted to make or provide any promise, representation or warranty with respect to allen + roth™ solid surface products.
To qualify for service under this warranty please contact the retail location from which you purchased your allen + roth™ solid surface product. A purchase receipt or other acceptable proof of purchase clearly showing both the date of purchase and that the installation was performed by a Sage authorized fabricator/installer will be required before warranty service is rendered.
If the warranty resolution is not handled to your satisfaction, please send us an email at customerservice@sagesurfaces.com or send your request via the “Contact Us” link at the bottom of our site and provide us with the details so we may better serve you.
Sage Surfaces
33300 Egypt Lane, Ste. A400
Magnolia TX 77354
877-648-3706
customerservice@sagesurfaces.com
Composition / Production |
allen + roth™ Solid Surface |
ISO 9001 Certification | Yes |
ISO 14001 Certification | Yes |
Water Absorption Coefficient, 24 hrs | 0.003% (0.5" thick) |
Hardness Test, Rockwell M Scale | 92 |
Hardness Test, Barcol Compressor | 63 |
Izod Impact Strength, ft-lbs/in of notch | 0.26 |
Tensile Strength, psi | 6,500 |
Tensile Modulus, psi | 1.4x106 |
Ball Drop, 0.5 lb. steel ball | >125" |
Flexural Strength, psi | 10,000 |
Flexural Elastic Modulus, psi | 1.3x106 |
Elongation | 0.73% |
Thermal Expansion Coefficient (oC) | 3.5x10-5 |
Weatherability, 1,000 hrs | No change |
Color Stability, 200 hrs | No change |
Thermal Resistance | No change |
Boiling Water Resistance | No change |
Stain Resistance | Pass rating 41 |
Food Zone Acceptability | Accepted/listed |
Fungal/Bacterial Resistance | No growth |
Specific Gravity - Solid Colors | 1.74 |
Specific Gravity - Textured Colors | 1.69 |
Flammability | Class 1 |
Flame Spread | 0-25 |
Smoke Density | < 25 |
Radiant Heat Resistance | No visual effect |
Wear and Cleanability | Pass |